How To Clean Airsoft Gun
Table of Contents [ ]
- How To Clean Airsoft Gun
- Step 1: Remove Magazine and Disconnect Battery
- Step 2: Unscrew Gearbox and Dissemble re Gun
- Step 3: Reenact Firing Motion to Access Blocked Parts
- Step 4: Blow out Debris & Clean Visible Areas with a Cloth or Q-tips
- Step 5: Lubricate Key Areas of the Gun
- Step 6: Reassemble the Gun
- Step 7: Connect the Battery, Refill the Magazine
- Step 8: Test the Gun
- Brief Recap
How To Clean Airsoft Gun
How To Clean Airsoft Gun
Airsoft guns have become incredibly popular in recent years, allowing for some fun and harm-free activity. As with any gun, whether real or fake, proper care is essential to ensure optimal performance, safety, and a longer lifespan. Therefore, the need to clean an Airsoft gun and its various components should never be overlooked. This article looks at 10 steps that should be taken to ensure any airsoft gun is cleaned and maintained in the best manner possible.
Step 1: Remove Magazine and Disconnect Battery
The first step in cleaning your airsoft gun is to remove the magazine and disconnect the battery. If the gun is firing, safety should be taken seriously and all potential sources of energy should be removed for proper and safe cleaning.
Step 2: Unscrew Gearbox and Dissemble re Gun
The next step is to unscrew the gearbox and take the gun apart as much as possible. This way, any possible dirt and debris can be removed from every individual part and all the essential components will be highly visible.
Step 3: Reenact Firing Motion to Access Blocked Parts
Certain areas and components may still not be visible when dissembling the gun even after removing the gearbox. By reenacting the firing motion of the gun, key components will become visible and accessible for cleaning.
Step 4: Blow out Debris & Clean Visible Areas with a Cloth or Q-tips
Once all of the components are visible, it's time to start cleaning. Blowing out all of the debris with a compressor or can of air is essential. Then, begin cleaning all of the debris-covered components using a cloth or Q-tips.
Step 5: Lubricate Key Areas of the Gun
Now that the debris is gone, it's time to lubricate the various components of the gun. This will help ensure proper functioning and protect any delicate components from dirt and dust in the future.
Step 6: Reassemble the Gun
With the gun fully clean and lubricated, it's now necessary to reassemble all the components. In order to do so correctly, take a look at the manual of the gun and make sure that all the components are fitted together properly and securely.
Step 7: Connect the Battery, Refill the Magazine
Once the gun is clean and reassembled, it's time to connect the battery and the magazine again. Offering protection against dirt and dust, it's also a good idea to make sure all of the parts are covered with the provided protective caps.
Step 8: Test the Gun
The last step in cleaning an airsoft gun is to give the gun a test run. Make sure it is functioning properly and that the gun is shooting straight. If the test run is successful, then the airsoft gun is ready for Star use.
Brief Recap
Cleaning an airsoft gun is a process that should not be overlooked and is essential for proper performance, optimal safety, and a longer lifespan for the gun. This article looked at 8 steps that should be taken when cleaning an airsoft gun. This includes removing the magazine and battery, dissembling the gun, reenacting the firing motion of the gun, blowing out debris, cleaning with a cloth or Q-tips, lubricating, reassembling, and testing. Following these steps properly and carefully will ensure that the airsoft gun is clean and functioning correctly.
Previous Page
Next Page